The Yaesu DR-1X repeater and Arcom RC210 controller work beautifully together once you get the initial connections and modifications completed. I started this process a while back with my post titled Yaesu DR-1X Modifications...
One of our local repeaters, K4SCO 147.36 had a power supply failure a couple of weeks ago. I’ve just now gotten around to opening it up and didn’t have to look very hard for...
Arduino / K4NHA / Manufacturers / RaspberryPI / Repeaters / Yaesu
I am currently modifying the first of several Yaesu DR-1X repeaters to allow control via an Arcom RC210 controller. Stage one involves splicing into the data cable which connects the TX and RX radios together....
1.25m / 220MHz Repeater / K4NHA / Repeaters
Unfortunately the tower location that was set to be home for the 220MHz Repeater I’ve been building fell through. Since I don’t have a decent home for the repeater yet I’ve put the project...
For the past year my local organization, Jackson County ARES/RACES, has been struggling to find a home for our SKYWARN linked repeater. Earlier in 2015 the tower owners kicked us out of the shack...
This week I started work on the 220MHz Repeater. I’ll be using a pair of TYT TH-9000D 220MHz transceivers and an Arcom RC210 controller. The first step in this project was adding a DE-9 serial...
